click for big picture
AF1A-I TIME-ALIGN

APPLICATIONS:

Auditorium Reinforcement
Church Sound Reinforcement
Home Theatre Systems
Nightclub Applications
Musical Instrument System

The AF1A-I is a permanent installation wide range loudspeaker system offering both high fidelity and high efficiency. The Time-Aligned studio quality sound provides detail and clarity not found in other designs. Rugged birch plywood finished with black paint and a black steel grille will fit nicely into almost any application. Optional flying attachment points allow for safe and convenient rigging.
SPECIFICATIONS:
SYSTEM COMPONENTS
ACOUSTIC AND ELECTRICAL
PHYSICAL
Enclosure:
18 mm 13-ply birch plywood

Low Frequency Transducer:
18" Cone
3" Voice coil
95 oz. Magnet

Mid Frequency Transducer:
12" Cone
2.5" Voice coil
80 oz. Magnet

High Frequency Transducer:
1" Exit compression driver
1.8" Titanium diaphragm
15 oz. Magnet
Radial horn

Input Connectors:
Cinch 142 screw terminal
barrier strip

Grille:
16 Gauge black vinyl
coated perforated steel

Optional Hardware:
Rigging points		 System Type:
3-way
Low section 5.5 cu. ft. vented
Mid section 1.0 cu. ft. sealed

Impedance:
4 Ohms

Crossover Network:
Passive Time-Align® equalizer type at
2.5 kHz and 125 Hz

Time Offset Between Drivers:
< ± 25 Microseconds

Frequency Response:
40 Hz to 20 kHz ±3 dB
(4pi Steradians)

Sensitivity:
101 dB SPL (1W @ 1m)

Dispersion:
80 degrees Horizontal (-6 dB)
60 degrees Vertical (-6 dB)
(Horn may be rotated 90 degrees for a
60 degrees H x 80 degrees V dispersion)

Power Handling:
300 W continuous sine wave
1200 W instantaneous peak		 Finish:
Black paint

Dimensions:
43"h x 22"w x 18"d
110 cm x 56 cm x 46 cm

Weight:
124 lbs.
57 kg

Shipping Dimensions:
20" x 45" x 25"
51 cm x 115 cm x 64 cm

Shipping Weight:
136 lbs.
62 kg

Download Datasheet 473 kb

About Time-Align ®

Bag End Loudspeakers, USA
847 382 4550     www.bagend.com