INFRA-M
APPLICATIONS:
Recording Studios
Film Post Production
Video Editing Suites
Mastering Labs
Theatrical Production
Cinema Reproduction
Home Theater Systems
Home Stereo Systems
Stereo Reproduction
Musical Inst. Reproduction
18 Hz INFRA dual integrator
INFRA Dynamic Filter
Balanced inputs
Internal frequency modifications
Convenient front panel controls
Input Configuration: Balanced
Alternate Input Configuration: Unbalanced
Max. Input Signal: 3 V (+10 dBu)
Output Connectors: XLR male
Output Configuration: Unbalanced
Max. Output Signal: 3 V (+10 dBu)
Nominal Output Impedance: 100 Ohms
Min. Suggested Load Impedance: 2.5 kOhms
Power-on Indication: Green LED
Operating Input Voltage: 10.5 - 18.5 VDC
Operating Current Required: < 100 mA
Input Voltage Connector: Miniature DC 2.5 mm
Input Voltage Polarity: Center pin +
Max. INFRA Attenuation: 10 dB
INFRA Cutoff Frequency Programming: Plug in resistors
INFRA Cutoff Frequency: 18 Hz
INFRA Output Mode: Sum in Stereo Mode
Nominal Dynamic Filter Threshold: 0 dBu Output
Min. Dynamic Filter Threshold: -10 dBu Output
Max. Dynamic Filter Threshold: +10 dBu Output
Max. Dynamic Filter Reduction Capability at 18Hz: 30 dB
Dynamic Filter Threshold Exceeded Indication: Red LED
INFRA Circuit Noise: < -85 dBu (20 Hz to 20 kHz)
INFRA Dynamic Range: > 95 dB (20 Hz to 20 kHz) (bandwidth unweighted)
Hi Pass Filter Frequency Programming: Plug in resistors
Factory Set Hi Pass Filter Frequency: - 3 dB @ 130 Hz/-6 dB @ 97 Hz
Hi Pass Filter Frequency Range: 50 Hz to 200 Hz
Hi Pass Filter Slope: 12 dB/octave
Hi Pass Circuit Noise: < -85 dBu (20 Hz to 20 kHz)
Hi Pass Dynamic Range: > 95 dB (20 Hz to 20 kHz) (bandwidth unweighted)
Enclosure Mounting: 1U EIA rack (1.75")
Dimensions: 1.75"h x 19"w x 5.25"d (5 cm x 49 cm x 14 cm)
Weight: 5 lbs. (2.3 kg)
Shipping Dimensions: 6" x 22" x 12" (16 cm x 59 cm x 31 cm)
Shipping Weight: 7 lbs. (3.2 kg)
Download
Datasheet (171
kb)
About INFRA
Bag
End Loudspeakers, USA847 382 4550 www.bagend.com
