INFRA-MX2

APPLICATIONS:

Portable Sound Systems
Cinema Reproduction
Auditorium Sound Systems
Church Sound Systems
Theatrical Production
Nightclub Applications
Musical Instrument Systems

Features:

18 Hz INFRA dual integrator
CVR hi pass limiting
INFRA Dynamic Filter
Balanced inputs
Internal frequency modifications
Convenient front panel controls
2-way stereo or 3-way mono mode

Use INFRA output with INFRA Loudspeakers only.
GENERAL SPECIFICATIONS

Input Connectors: XLR female
Input Configuration: Balanced
Alternate Input Configuration:
Unbalanced
Maximum Input Signal:
5
V (+16 dBu)
Output Connectors:
XLR male
Output Configuration:
Unbalanced
Maximum Output Signal:
3 V (+10 dBu)
Nominal Output Impedance:
100 Ohms
Minimum Suggested Load Impedance:
2.5 kOhms
Power-on Indication:
Green LED
Operating Input Voltage:
12 - 15 VDC
Operating Current Required:
200 mA
Input Voltage Connector:
Miniature DC 2.5 mm
Input Voltage Polarity:
Center pin +

INFRA SPECIFICATIONS
Maximum INFRA Gain: 10 dB
Maximum INFRA Attenuation:
10 dB
INFRA Cutoff Frequency Programming:
Plug in resistors
INFRA Cutoff Frequency:
8 Hz to 40 Hz, Factory Set 18 Hz
INFRA Output Mode:
Sum in Stereo Mode
Nominal Dynamic Filter Threshold:
0 dBu Output
Minimum Dynamic Filter Threshold:
-10 dBu Output
Maximum Dynamic Filter Threshold:
+10 dBu Output
Maximum Dynamic Filter Reduction Capability at 18Hz:
30 dB
Dynamic Filter Threshold Exceeded Indication:
Red LED
INFRA Circuit Noise:
< -90 dBu (20 Hz to 20 kHz)
INFRA Dynamic Range:
>105 dB (20 Hz to 20 kHz) (bandwidth unweighted)
HI PASS SPECIFICATIONS

Maximum Hi Pass Gain: 10 dB
Maximum Hi Pass Attenuation:
10 dB
Hi Pass Filter Frequency Programming: Plug in resistors
Factory Set Hi Pass Filter Frequency:
- 3 dB @ 130 Hz/-6 dB @ 97 Hz
Hi Pass Filter Frequency Range:
50 Hz to 200 Hz
Hi Pass Filter Slope:
12 dB/octave
Hi Pass Circuit Noise:
< -90 dBu (20 Hz to 20 kHz)
Hi Pass Dynamic Range:
> 105 dB (20 Hz to 20 kHz) (bandwidth unweighted)

PHYSICAL SPECIFICATIONS
Enclosure: Black powder coated steel
Enclosure Mounting: 1U EIA rack (1.75")
Dimensions: 1.75"h x 19"w x 5.25"d (5 cm x 49 cm x 14 cm)
Weight: 5 lbs. (2.3 kg)
Shipping Dimensions:
6" x 22" x 12" (16 cm x 59 cm x 31 cm)
Shipping Weight: 7 lbs. (3.2 kg)
Download Datasheet (261 kb)
About INFRA
Bag End Loudspeakers, USA
847 382 4550     www.bagend.com