Bag End TA2000-I - Time-Align

P-TA2000-I TIME-ALIGN

APPLICATIONS:

Auditorium Sound Reinforcement
Church Sound Reinforcement
NIghtclub Installations
Film and Video Post Production

MINIMA ONE SELF POWERED The P-TA2000-I is a permanent installation full range self powered loudspeaker system offering both high fidelity and high efficiency. The Time-Aligned™ studio quality sound provides detail and clarity not found in other designs. Rugged birch plywood enclosure finished with our beautiful utility black textured finish and a black steel grille will fit nicely into almost any application. Optional flying attachment points allow for safe and convenient rigging.

Enclosure:
18 mm 13-ply birch plywood

Low Frequency Transducer:
12" Cone
2.5" Voice coil
80 oz. Magnet

High Frequency Transducer:
1" Exit compression driver
1.8" Titanium diaphragm
15 oz. Magnet

Internal Amplification:
1- Minima One

Grille:
16 Gauge black vinyl
coated perforated steel

Optional Hardware:
Rigging points

System Type:
2-way vented 2 cu. ft.

Input:
10K Ohms Balanced XLR inputs
with loop through

Input CAL Sensitivity: ±4 dBu

System Power:
500 W continuous

Frequency Response:
70 Hz to 20 kHz ±3 dB
(4 pi Steradians)

Hi Pass Filter Frequency Switchable:
-6dB @ 8 Hz, @ 50 Hz, @ 95 Hz

Dispersion:
80 degrees Horizontal (-6 dB)
60 degrees Vertical (-6 dB)
(Horn may be rotated 90 degrees for a 60 degrees H x 80 degrees V dispersion)

Crossover Network:
Passive Time-Align equalizer type
at 2.5 kHz

Time Offset Between Drivers:
< +/- 25 Microseconds

Maximum Acoustic Output:
Half Space @ 1 Meter
127 dBSPL

LED Indicators:
Green, On
Yellow, System Limit
Red, System Fault or Sleep Mode

AC Power Requirements
88 Volts Minimum
270 Volts Maximum

Finish:
Black textured finish

Dimensions:
21"h x 17"w x 18"d
54 cm x 44 cm x 46 cm
Trapezoidal, 11degree taper per side

Weight:
55 lbs.
25 kg

Shipping Dimensions:
23" x 25" x 21"
59 cm x 64 cm x 54 cm

Shipping Weight:
66 lbs.
30 kg