P-TA5000-I TIME-ALIGN
APPLICATIONS:
Auditorium Sound Reinforcement
Church Sound Reinforcement
Film and Video Post Production
Nightclub Applications
MINIMA
ONE SELF POWERED The P-TA5000-I is a permanent installation full range self
powered loudspeaker system offering both high fidelity and high efficiency.
The Time-Aligned studio quality sound provides detail and clarity not
found in other designs. Rugged birch plywood finished with our beautiful utility
black textured finish and a black steel grille will fit nicely into almost any
application. Optional flying attachment points allow for safe and convenient
rigging.
SPECIFICATIONS:
Enclosure:
18 mm 13-ply birch plywood
Low Frequency Transducer:
15" Cone
2.5" Voice coil
80 oz. Magnet
High Frequency Transducer:
1" Exit compression driver
1.25" Titanium diaphragm
24 oz. Magnet
Exponential horn
Internal Amplification:
1-Minima One
Grille:
16 Gauge black vinyl
coated perforated steel
Optional Hardware:
Rigging points
System
type:
2-way vented - 3.4 cu. ft.
Inpute:
10k Ohms Balanced SLR inputs
with loop through
Input CAL Sensitivity: +4dBu
System Power:
500 W continuous
Frequency Response:
50 Hz to 19 kHz +/- 3 dB
(4 pi Steradians)
Hi Pass Filter Frequency Switchable:
-6dB @ 8 Hz, @ 50 Hz, @ 95 Hz
Dispersion:
90 degrees Horizontal (-6 dB)
40 degrees Vertical (-6 dB)
Crossover Network:
Passive Time-Align equalizer
type at 1.7 kHz
Time Offset Between Drivers:
< +/- 25 Microseconds
Maximum Acoustic Output:
Half Space @ 1 Meter
127 dBSPL
LED Indicators:
Green, On
Yellow, System Limit
Red, System Fault or Sleep Mode
AC Power Requirements:
88 Volts Minimum
270 Volts Maximum
Finish:
Black textured finish
Dimensions:
27"h x 22"w x 18"d
69 cm x 56 cm x 46 cm
Trapezoidal, 8 degree taper
per side
Weight:
80 lbs.
36 kg
Shipping Dimensions:
21" x 30" x 25"
54 cm x 76 cm x 64 cm
Shipping Weight:
88 lbs.
40 kg