click for big picture

TA2000-I TIME-ALIGN

APPLICATIONS:

Auditorium Sound Reinforcement
Church Sound Reinforcement
NIghtclub Applications
DJ Systems Installation
Foreground Music Systems
The TA2000-I is a permanent installation full range loudspeaker system offering both high fidelity and high efficiency. The Time-Aligned™ studio quality sound provides detail and clarity not found in other designs. Rugged birch plywood enclosure finished with our beautiful utility black textured lacquer and a black steel grille will fit nicely into almost any application. Optional flying attachment points allow for safe and convenient rigging.
SPECIFICATIONS:

SYSTEM COMPONENTS

ACOUSTIC AND ELECTRICAL

PHYSICAL
     
Enclosure:
18 mm 13-ply birch plywood

Low Frequency Transducer:
12" Cone
2.5" Voice coil
80 oz. Magnet

High Frequency Transducer:
1" Exit compression driver
1.8" Titanium diaphragm
15 oz. Magnet
Radial horn

Input Connectors:
Cinch 142 screw terminal
barrier strip

Grille:
16 Gauge black vinyl
coated perforated steel

Optional Hardware:
Rigging points		 System Type:
2-way vented 2 cu. ft.

Impedance:
8 Ohms

Crossover Network:
Passive Time-Align equalizer type at 2.5 kHz

Time Offset Between Drivers:
< +/- 25 Microseconds

Frequency Response:
70 Hz to 20 kHz ±3 dB
(4 pi Steradians)

Sensitivity:
101 dB SPL (1W @ 1m)

Dispersion:
80 degrees Horizontal (-6 dB)
60 degrees Vertical (-6 dB)
(Horn may be rotated 90 degrees for a 60 degrees H x 80 degrees V dispersion)

Power Handling:
200 W continuous sine wave
800 W instantaneous peak		 Finish:
Black textured lacquer

Dimensions:
21"h x 17"w x 18"d
54 cm x 44 cm x 46 cm
Trapezoidal, 11degree taper per side

Weight:
50 lbs.
23 kg

Shipping Dimensions:
23" x 25" x 21"
59 cm x 64 cm x 54 cm

Shipping Weight:
61 lbs.
28 kg

Download Datasheet 127 kb

About Time-Align®

Bag End Loudspeakers, USA
www.bagend.com