click for big picture

TA5000-I TIME-ALIGN

APPLICATIONS:

Auditorium Sound Reinforcement
Church Sound Reinforcement
Nightclub Applications
DJ System Installation

The TA5000-I is a permanent installation full range loudspeaker system offering both high fidelity and high efficiency. The Time-Aligned™ studio quality sound provides detail and clarity not found in other designs. Rugged birch plywood with our beautiful utility black textured finish and a black steel grille will fit nicely into almost any application. Flying attachment points allow for safe and convenient rigging.
SPECIFICATIONS:

 SYSTEM COMPONENTS

ACOUSTIC AND ELECTRICAL

 PHYSICAL
Enclosure:
18 mm 13-ply birch plywood

Low Frequency Transducer:
15" Cone
2.5" Voice coil
80 oz. Magnet

High Frequency Transducer:
1" Exit compression driver
1.25" Titanium diaphragm
24 oz. Magnet
Exponential horn

Input Connectors:
Cinch 142 screw terminal
barrier strip

Grille:
16 Gauge black vinyl
coated perforated steel

Hardware:
F6 rigging points		 System type:
2-way vented - 3.4 cu. ft.

Impedance:
8 Ohms

Crossover Network:
Passive Time-Align equalizer type at 1.7 kHz

Time Offset Between Drivers:
< +/- 25 Microseconds

Frequency Response:
50 Hz to 19 kHz +/- 3 dB
(4 pi Steradians)

Sensitivity:
101 dB SPL (1W @ 1m)

Dispersion:
90 degrees Horizontal (-6 dB)
40 degrees Vertical (-6 dB)

Power Handling:
200 W continuous sine wave
800 W instantaneous peak		 Finish:
Black textured lacquer

Dimensions:
27"h x 22"w x 18"d
69 cm x 56 cm x 46 cm
Trapezoidal, 8 degree taper
per side

Weight:
75 lbs.
34 kg

Shipping Dimensions:
21" x 30" x 25"
54 cm x 76 cm x 64 cm

Shipping Weight:
83 lbs.
38 kg

Download Datasheet
138 kb

About Time-Align®

Bag End Loudspeakers, USA
www.bagend.com